Filter
Top Products
Last Number Redial
Aspire Software Manual Features ◆ 381
Related Features
Automatic Route Selection
When using Automatic Route Selection, ARS selects the trunk for the call unless the user preselects.
Repeat Redial
The system can periodically redial an unanswered trunk call.
Save
A user can save the number of an outgoing call to be accessed at a later time.
Operation
To redial your last call:
1. Without lifting the handset, press LND.
The last dialed number is displayed.
2. To redial the last number, press #.
OR
Search for the desired number from the Redial List by pressing the LND or VOLUME ▲ or
VOLUME ▼ keys.
3. Lift the handset or press SPK to place the call.
The system automatically selects a trunk from the same group as your original call and
dials the last number dialed.
OR
1. At keyset, press idle line key (optional).
The system automatically selects a trunk from the same group as your original call.
2. Press LND.
OR
1. At keyset, press idle CALL key.
OR
At single line telephone, lift handset.
2. Dial #5.
The system automatically selects a trunk from the same group as your original call and
dials the last number dialed.
To redial your last call on an i-Series phone:
1. Press LINE + LND + #.
OR
2. Press LND + CALL key or # to redial the displayed number or press the LND key until the
desired number is displayed, then press # or CALL key.
If a line key is not pressed, the system automatically selects a trunk from the same
group as the original call.
OR
3. Press CALL key + #5.
If a line key is not pressed, the system automatically selects a trunk from the same
group as the original call.