Filter
Top Products
Headset Operation
348 ◆ Features Aspire Software Manual
Headset Operation
Description
A keyset user can utilize a customer-provided headset in place of the handset. Like using Hands-
free, using the headset frees up the user’s hands for other work. However, Headset Operation pro-
vides privacy not available from Handsfree.
An extension with a headset has two options for when it appears busy to incoming callers. The
headset extension can be:
● Busy to incoming callers when only one extension appearance is busy (i.e., Off-Hook Signal-
ing prevented)
OR
● Busy to incoming callers only when both extension appearances are busy (i.e., Off Hook Sig-
naling allowed)
As the headset plugs into a separate jack on the bottom of the phone, the handset can still be con-
nected to the phone. This provides you with the option to use the handset, headset or the speaker-
phone for calls.
Examples of compatible headsets are the:
● Polaris Supra Monaural Noise Cancelling, P/N 750036
● Polaris Supra Binaural Noise Cancelling, P/N 750033
● Polaris Encore Binaural Noise Cancelling, P/N 750035
Headset Operation for SLT Headset Operation
The ability for single line telephone users to use the Headset feature has been added. When a single
line telephone with a headset receives an incoming call, the system can let the SLT user know of the
incoming call by a notification tone in their headset.
Notes:
(A.) This feature is only applicable when the SLT is set in headset mode and the system allows the
headset ringing with their class of service.
(B.) If a SLT with headset ringing condition goes on hook, the SLT will ring normally.
(C.) If a SLT is set to automatically seize a trunk, this feature is NOT available for the SLT.
(D.) If a SLT is set for the Ringdown feature, the headset mode is NOT available. But, if the Ring-
down call start time is equal to or more than the headset ringing start time, the Headset fea-
ture, and not the Ringdown feature, is available.
(E.) Caller ID should be disabled for the SLT when then Headset feature is to be used (Program 15-
03-09 and 15-03-10 set to "0"). Otherwise, the phone will only beep twice with an incoming
call. In addition, the phone will not receive the Caller ID information when the Headset fea-
ture is used.
Aspire S Aspire M/L/XL
• Available.
• SLT Headset Operation available.
• Available.
• SLT Headset Operation available with 1.02+.