Filter
Top Products
Save Number Dialed
Aspire Software Manual Features ◆ 501
Save Number Dialed
Description
Save Number Dialed permits an extension user to save their last outside number and easily redial it
later on. For example, an extension user can recall a busy or unanswered number without manually
dialing the digits. The system retains the saved number until the user stores a new one in its place.
Save Number Dialed saves in system memory a dialed number up to 24 digits. The number can be
any combination of digits 0-9, # and *. The system remembers the digits regardless of whether the
call was answered, unanswered or busy. The system normally uses the same trunk group as for the
initial call. However, the extension user can preselect a specific trunk if desired.
Conditions
None
Default Setting
Enabled.
Programming
➻
11-12-13 : Service Code Setup (for Service Access) - Saved Number Dialed
Customize the service code (815 by default) to be used for dialing a saved number.
➻ 15-07-01 : Programmable Function Keys
Assign a function key as a Save key (code 30).
Related Features
Automatic Route Selection
For systems with Automatic Route Selection, ARS selects the trunk for the call unless the user pre-
selects.
Central Office Calls, Placing
Other programmed options for outgoing calls can affect how a call is placed. Check or pro-
gram these options as needed.
Dial Tone Detection
Refer to this feature for the specifics on how the system handles Dial Tone Detection.
Last Number Redial
An extension user can quickly redial the last number placed.
Programmable Function Keys
Function keys simplify Save Number Dialed operation.
Repeat Redial
The system can automatically retry a trunk call that was unanswered or busy.
Aspire S Aspire M/L/XL
• Available. • Available.