Filter
Top Products
Direct Inward Dialing (DID)
282 ◆ Features Aspire Software Manual
Call by Time Schedule Feature Added
For every DID number programmed, the DID Call by Time Schedule feature allows each of the 8
different time patterns (defined in Program 22-17) to be assigned a different destination, following
the DID conversation table in Program 22-11. This time pattern can also be selected manually,
using a service code. The time pattern used for this option is separate from the 8 day/night time
modes defined in Program 12-02.
Notes:
● When the time pattern is changed manually, the following conditions apply:
● Manually selecting the time pattern temporarily overrides the entries in Program 22-17.
However, when a time pattern changes with the time schedules in Program 22-17, the pat-
tern applied by the manual change is cancelled.
● If the time pattern is manually selected and the system is reset, once the system restarts,
the manually selected time pattern is still in affect.
● When a time pattern is set as 00:00 from 00:00 and Program 22-11 is defined, the system will
always follow the setting in Program 22-11. To prevent the system from using Program 22-11,
it must be undefined.
● If the destination defined in Program 22-17 is not found, the system then checks the setting in
Program 22-11.
● If an incoming DID call is unanswered/busy, it will follow the entries in Program 22-12 and
22-13 for the trunk group based on the time the no answer/busy indication was received.
Federal Communications Commission DID Requirements
Allowing this equipment to operate in a manner that does not provide proper answer supervision
signaling is in violation of Part 68 rules.
This equipment returns answer supervision to the Public Switched Telephone Network when the
DID trunk is:
● Answered by the called station
● Answered by the attendant
● Routed to a recorded announcement that can be administered by the CPE user
● Routed to a dial prompt
This equipment returns answer supervision on all DID calls forwarded back to the Public Switched
Telephone Network. Permissible exceptions are when:
● A call is unanswered
● A busy tone is received
● A reorder tone is received
When ordering DID service, provide the telco with the following information:
FCC Registration Number:
Aspire S: KF = US:NIFKF06BASPIRES
MF = US:NIFMF06BASPIRES
PF = US:NIFPF06BASPIRES
Aspire: KF = US:NIFKF07BASPIRE
MF = US:NIFMF07BASPIRE
PF = US:NIFPF07BASPIRE
DID Facility Interface Code . . . . . . . . 02RV2-T
DID Service Order Code . . . . . . . . . . . 9.0F
DID Answer Supervision Code. . . . . . A S.2
DID USOC Jack Type . . . . . . . . . . . . . RJ21X