Filter
Top Products
Program 92 : Copy Program
92-03 : Copy by Port Number
Aspire Software Manual Programming ◆ 1555
92-03 : Copy by Port Number
Description
Use Program 92-03 : Copy by Port Number to copy the data for a keyset to another keyset based
on the port number. Refer to the following chart to see which programs which can be copied.
Copy Program is applicable only for the following programs.
(Refer to Program 92-01-01 to copy these programs by extension number.)
Level:
Aspire S Aspire M/L/XL
IN
• Available with software 2.65+. • Available with software 2.65+.
• Copying Program 23-02 requires software
2.67+.
• Copying Program 23-02 requires software
2.67+.
Program No. Program Name Note
15-01 Extension Basic Data Setup (include Virtual
Extension)
Copy all data except extension name (item 01).
15-02 Multi-Line Telephone Basic Data Setup
15-03 Single Line Telephone Basic Data Setup
15-04 PHS Terminal Basic Data Setup Copy Item 11, 12 and 13.
15-06 Trunk Access Map for Extension
15-07 Programmable Function Key
15-08 Incoming Virtual Extension Ring Tone Setup
15-09 Virtual Extension Ring Assignment
15-10 Incoming Virtual Extension Ring Tone Order
Setup
15-11 Virtual Extension Delayed Ring Assignment
15-12 Conversation Recording Destination for Exten-
sion
20-06 Class of Service for Extension
21-02 Trunk Group Routing for Extensions
21-04 Toll Restriction Class for Extensions
21-11 Hotline Assignment
23-02 Call Pickup Group
23-03 Ringing Line Preference
23-04 Ringing Line Preference for Virtual Extensions
24-03 Park Group Assignment
31-02 Internal Paging Group Assignment