Filter
Top Products
Program 11 : System Numbering
11-15 : Service Code Setup, Administrative (for Special Access)
Aspire Software Manual Programming ◆ 831
11-15 : Service Code Setup, Administrative (for Special Access)
Description
Use Program 11-15 : Service Code Setup, Administrative (for Special Access) to customize the
special access Service Codes which are used by the administrator in the Hotel/Motel feature. You can
customize additional Service Codes in Programs 11-10 through 11-14 and 11-16. The following chart
shows:
● The number of each code (01-07)
● The function of the Service Code.
● What type of telephones can use the Service Code
● The code’s default entry.
● Programs that may be affected with the changing the code.
If you change a Service Code, be sure to record your entry in the “New” column.
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Item 9 requires software 2.63+.
• Item 12 requires software 4.0E+.
• Item 13 requires software 4.93+.
• Item 9 requires software 2.63+.
• Item 12 requires software 4.0E+.
• Item 13 requires software 4.93+.
Item
No.
Item Terminals Default New
Related
Program
01 Remote Maintenance
Set the service code used in the dial-up number when
using the serial or USB port for PCPro or WebPro
830
02 ACD Access in Dial-In Conversion Table 860 22-04
22-11
03 Backup Data Save
This option will save the user’s soft key settings
(extension’s programmed Call Forwards, DND, etc.).
It is recommended to use this feature before upgrad-
ing the system software.
KTS #*#9
04 Not Used
05 System Programming Mode, Log-On KTS #*#* 11-01
06 Wake on LAN to APSU Unit KTS No Setting 10-22
07 Recording Destination in Dial-In Conversion Table No Setting
08 Network Message Lamp Control 866