Filter
Top Products
Tandem Trunking (Unsupervised Conference)
552 ◆ Features Aspire Software Manual
Tandem Trunking Method B - Tandem Trunking with Transfer Key
➻ 10-07-01 : Conversation Record Circuits
The number of circuits assigned as Conversation Record circuits limits the number of avail-
able Conference circuits. Make sure there are circuits available for Conference.
➻ 14-01-04 : Basic Trunk Data Setup - Transmit Gain Level for Conference and Transfer
Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
➻ 14-01-05 : Basic Trunk Data Setup - Receive Gain Level for Conference and Transfer
Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
➻ 14-01-13 : Basic Trunk Data Setup - Loop Disconnect Supervision
For each trunk, enter 1 to enable loop supervision.
➻ 14-02-09 : Analog Trunk Data Setup - Busy Tone Detector
If this option is enabled (1) for a trunk, if there is no DSP resource available, the Multiple
Trunk Conference cannot be completed.
➻ 15-07-01 : Programmable Function Keys
Assign a function key for Transfer (code 06).
➻ 20-06-01 : Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
➻ 20-07-11 : Class of Service Options (Administrator Level) - Forced Trunk Disconnect
In an extension’s Class of Service, enter 1 to enable Forced Trunk Disconnect. This allows the
extension to disconnect an Unsupervised Conference in progress (initially set up using
Method B).
➻ 20-11-14 : Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk Transfer
Disable (0) the Trunk-to-Trunk Transfer Restriction option.
➻ 20-13-10 : Class of Service Options (Supplementary Service) - Barge In Mode
In an extension’s Class of Service, set whether an extension should be able to Barge In to a
call and talk (1) or just monitor the call (0).
➻ 24-02-07 : System Options for Transfer - Forced Release for Trunk-to-Trunk Transfer
This timer will start when a trunk begins talking with another trunk (for example: trunk-to-
trunk transfer, outgoing from trunk, Tandem Trunking) (0-64800).
Related Features
Call Forward, Off Premise
A trunk can be set up to automatically tandem trunk/forward to an outside telephone number
or Abbreviated Dialing bin.
Central Office Calls, Answering / Central Office Calls, Placing
Other programmed options for incoming and outgoing calls can affect how calls are handled.
Check or program these options as needed.
Conference, Voice Call
Set up a Conference with a co-worker in your immediate work area.
Direct Inward System Access (DISA)
DISA calls also use the same Continue/Disconnect codes.
Meet Me Conference
Meet Me Conference lets an extension user set up a Conference via Paging.
Meet Me Paging
Meet Me Paging lets an extension user set up a two-party meeting via Paging.