Filter
Top Products
Program 15 : Extension, Basic Setup
15-07 : Programmable Function Keys
Aspire Software Manual Programming ◆ 923
[2] Appearance Function Level (*00 - *99) (Service Code 852)
Function
Number
Function Additional Data LED Indication
*00 Not Used
*01 Trunk Key Trunk Number (1-8 or 001-200) Red On: Trunk busy by another user
Green On: Trunk busy by extension
*02 Trunk Group/Loop Key Trunk Group Number
(1-8 or 001-100)
Red On: Trunk busy by another user
Green On: Trunk busy by extension
*03 Virtual Extension Key Extension Number or Depart-
ment Group Number
Red On: Trunk busy by another user
Slow Blink (Red): Incoming call
*04 Park Key Park Number (01 – 64) Slow Blink (Red): Call placed in
Park by another user
Fast Blink (Green): Extension
placed call in Park
*05 Loop Keys
Use Programs 15-13-01 or
15-13-02 to assign the loop key
to a trunk group.
• 0=Incoming + Trunk Group
Number (1-8 or 001-100)
• 1=Outgoing + Trunk Group
Number (1 -8 or 001-100)
• 2=Both + Trunk Group
Number (1-8 or 001-100)
Green On: Extension on an active
call
*06 Trunk Access Via Networking Network System Number
(01-50)
*07 Personal Park Slow Blink (Green): Parked call
recalling extension user
Fast Blink (Green): Extension
placed call in Personal Park
*10 ACD Log – In / Log – Out Red On: Under log-on
Off: Under log-off
*11 -Not Used -
*12 ACD Emergency Call Red On: Under monitor, Override,
Standby
Fast Blink (Red): Supervisor phone
receiving Emergency Call
*13 ACD Off Duty Mode Red On: Under off duty
Slow Blink (Red): Under reservation
*14 ACD Start / End Red On: ACD operation end
*15 ACD Monitor Mode - Terminal Red On: Under monitor
*16 ACD Standby Mode Red On: Standby
*17 ACD Wrap-Up Mode Red On: Under work time
Slow Blink (Red): Under reservation