Filter
Top Products
Program 84 : Hardware Setup for VoIP
84-11 : Dterm IP CODEC Information Basic Setup
Aspire Software Manual Programming ◆ 1463
84-11 : Dterm IP CODEC Information Basic Setup
Description
Use Program 84-11 : Dterm IP CODEC Information Basic Setup to setup the basic CODEC
options for the Dterm IP phone (IPhone or a keyset with an IP adapter).
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Items 29 and 30 available.
• Item 1 and 7 entries increased with soft-
ware 2.63+.
• Items 29 and 30 available with software
1.18+. Requires VOIPU PCB firmware
3.2+.
• Item 1 and 7 entries increased with soft-
ware 2.63+.
Type 1 - 5
Item
No.
Item Input Data Default
01 G711 Audio Frame
Prior to software 2.63, the only entry possible was “3”. With software
2.63+, additional entries are available.
Note: Currently, only the Aspire S system can use the 10ms setting.
Aspire will provide this option in the future
1 - 3
(1 = 10ms,
2 = 20 ms,
3 = 30ms)
3
02 G711 VAD Mode 0...Disable
1...Enable
0
03 G711 Type 0...A-law
1...u-law
1
04 G.711 Jitter Buffer Min 0~145 ms 30
05 G.711 Jitter Buffer Type 0~145 ms 60
06 G.711 Jitter Buffer Max 0~145 ms 120
07 G.729 Audio Frame
Prior to software 2.63, the only entry possible was “3” or “4”. With
software 2.63+, additional entries are available
The phone must be able to support 80 ms (the NEC IPhone and IP
adapter only support up to 40 ms).
Note: Currently, only the Aspire S system can use the 10ms setting.
Aspire will provide this option in the future.
1-8
(1 = 10ms,
2 = 20ms, etc.)
3
08 G.729 VAD Mode 0 = Disable
1 = Enable
0