Filter
Top Products
Caller ID
Aspire Software Manual Features ◆ 181
Description (Cont’d)
Outputting Caller ID Data
The system includes the Caller ID data on the SMDR report. The report provides the incoming call’s
DN in the DIALED NUMBER field. The CLASS field shows PIN (just like all other incoming calls).
Caller ID Digits to Voice Mail
A Caller ID/ANI trunk can send Remote Log-On Protocol with Caller ID digits to the voice mail.
When a trunk ‘001’ receives the Caller ID as ‘12345’, the protocol becomes ‘***60001*12345*’.
Display Reason for No Caller ID Information
With Caller ID enabled, the system will provide information for analog calls that do not detect the
Caller ID information. If the Caller ID information is restricted, the telephone display will show
“PRIVATE”. If the system is not able to provide Caller ID information because telco information is
not detected, then the display will show “NO CALLER INFO”.
Calling Party Number Information
When using the Aspire Wireless telephone, the system can provide the Caller ID information for an
external call if it is provided by the telco.
Option to Enable Caller ID Name for SLT
System programming provides an option for single line telephones to display Caller ID.
Add Trunk Access Code to Caller ID with Aspire Wireless Phones
Aspire Wireless (DECT) phones on the Aspire can hold incoming call history. This history is cre-
ated based on the Caller ID information element contained in the call’s Setup message which is
transmitted from the Aspire. This information allows users to return calls dialing the number stored.
The stored number, however, does not contain the trunk access code. Without this code, the system
may not be able to seize an outside line to complete the call.
With this feature, when an Aspire Wireless user receives an incoming trunk call, the trunk access
code defined in programming can be added to the Caller ID. This will allow the system to seize an
outside line and then dial the stored number.
● This function is only applied to incoming analog trunks. It does not apply to incoming extension
calls.
● Caller ID must be available for this feature to work.
● Caller ID Edit Mode (Program 20-19-03) must be enabled.
● The maximum number of Caller ID digit is 20. If the total number of digits (trunk access code
(Program 10-02-05) and Caller ID) is over 20, the remaining Caller ID digits are not dialed.
For example:
Trunk Access Code (Program 10-02-05): 123456#* (8 digits)
Incoming Caller ID: 12345678901234567890 (20 digits)
Aspire Wireless Dials: 123456#*123456789012