Filter
Top Products
Program 35 : SMDR and Account Code Setup
35-02 : SMDR Output Options
1222 ◆ Programming Aspire Software Manual
07 Toll Charge Cost
Set this option to (1) have the SMDR report
include toll charges.
0=Not Displayed
1=Displayed
1
08 Incoming Call
Enable this option (1) to have the SMDR
report include incoming calls. If you disable
this option (0), incoming calls will not print.
0=Not Displayed
1=Displayed
1
09 Extension Number or Name
Set this option (1) to have the SMDR report
include extension numbers. Set this option (0)
to have the SMDR report include extension
names.
0=Name
1=Number
1
10 All Lines Busy (ALB) Output
Determine if the All Lines Busy (ALB) indica-
tion should be displayed.
0=Not Displayed
1=Displayed
0
11 Walking Toll Restriction Table Number
- Not Used -
0=Not Displayed
1=Displayed
1
12 DID Table Name Output
Determine if the DID table name should be
displayed.
0=Not Displayed
1=Displayed
0
13 CLI Output When DID to Trunk
Determine if the CLI output should be dis-
played for DID.
0=Not Displayed
1=Displayed
14 Date
Determine whether the date should be dis-
played on SMDR reports. This option must be
set to “0” if the trunk name is set to be dis-
played in Program 35-02-03.
0=Not Displayed
1=Displayed
0
15 CLI / DID Number
Determine if the CLI/DID Number should be
displayed.
Caller ID Name (2) requires software 4.0E+.
0=Caller ID Number
1=DID Calling
Number
2=Caller ID Name
0
16 Trunk Name or Received Dialed Number
Determine how the SMDR should print
incoming calls on ANI/DNIS or DID trunks. If
set to (1), ANI/DNIS trunks can print DNIS
digits. If set to (0) trunk names are printed
instead.
0=Trunk port name
1=Received dialed
number
0
17 Print Account Code or Caller ID Name
Determine whether the Account Code or
Caller ID name should appear in the SMDR
record.
Note: Program 35-01-08 must be set to "0" for
this entry to be followed.
0=Acount Code
1=Caller ID Name
0
Item
No.
Item Input Data Default