Filter
Top Products
Automatic Route Selection
Aspire Software Manual Features ◆ 139
Class of Service Option Allows Outgoing Calls to Not Follow Access Map
Using this option allows an extension’s Class of Service to be set so that ARS does not follow the
trunk access map settings (Program 14-07-01 and 15-06-01). The feature allows an extension user
to have CO line keys on their phone which allow incoming access only. The user would only have
outgoing access on the CO lines when using ARS to place a call.
Class of Service Matching
With the ARS Class of Service Match Access feature, you can determine whether the system should
allow a call based on the COS assigned to the Dial Analysis Table (Program 26-02). This change
can be used to create a tenant-like application. It will then use the trunk group defined in the Addi-
tional Entry in Program 26-02-03 to place the outgoing call.
When this feature is enabled, the calls will be routed in sequential order, and will forward provided
the Class of Service for the trunk groups match.
For this feature a new system option, Program 26-01-06 : Automatic Route Selection Service,
COS Match Access, is added. In adding this feature, the ARS table is expanded from 200 to 400.
First 200 entries will be compatible with the previous software as well as the 2.63 software.
The examples below use the following system programming:
Program 26-02 for Dial Analysis Table for ARS set as:
Program 12-02 for Automatic Night Service Patterns as:
Program 26-04 for ARS Class of Service as:
Program 26-01-03 for ARS Misdialed Number Handling as: 1(Warning Tone)
Table No. Program 26-02-01
Dial
Program 26-02-02
Service Type
Program 26-02-03
Add Data
Program 26-02-04
ARS COS
1 203@@@@@@@ 1: Route to trunk group 3 (Group 3) 5
2 214@@@@@@@ 1: Route to trunk group 1 (Group 1) 4
197 @@@@@@@@@@ 1: Route to trunk group 2 (Group 2) 4
198 @@@@@@@@@@ 1: Route to trunk group 3 (Group 3) 3
199 @@@@@@@@@@ 1: Route to trunk group 2 (Group 2) 2
200 @@@@@@@@@@ 1: Route to trunk group 1 (Group 1) 1
Time Pattern No. Program 12-02-01
Start Time
Program 12-02-02
End Time
Program 12-02-03
Operation Mode
1 00:00 08:30 2 (Night)
2 08:30 17:00 1 (Day)
3 17:00 00:00 2 (Night)
Ext. 301 Ext. 302 Ext. 401 Ext. 402
Mode 1(Day) 1 2 3 3
Mode 2(Night) 1 4 3 5