Filter
Top Products
Program 20 : System Option Setup
20-03 : System Options for Single Line Telephones
Aspire Software Manual Programming ◆ 961
Conditions
None
Feature Cross Reference
● Single Line Telephones, Analog
● Single Line Telephones, Digital
04 Dial Sending Start Time for SLT or ARS
When ARS or an analog extension user accesses a trunk
and dials an outside call, the system waits this interval
before outdialing the first digit. The timer will restart
when a user dials another digit.
When using a 3rd-party external paging device, set this
option to “1”. In addition, set Program 20-03-03 to “1”.
0-64800 seconds 3 20-03-03
20-03-07
05 SLT Operation Mode 0 = Normal Mode
1 = Extended Mode1
2 = Extended Mode2
0
06 Headset Ringing Start Time
Define the headset ringing start time. After this timer
expires from the time when a SLT is off hook, the system
will set the SLT to headset ringing mode.
0-64800 seconds 5 20-13-38
07 Forced Dial Sending Start Time
This option is used for SLT DTMF dialing. When Pro-
gram 20-03-03 (SLT DTMF Dial to Trunk Lines) is set
to "0" (receive all digits before sending), the system will
following the timers in Program 20-03-04 and 23-03-07.
The timer in Program 20-03-04 : System Options for
Single Line Telephones - Dial Sending Start Time for
SLT or ARS will reset when the user dials another digit.
This timer will not reset when a digit is dialed. The user
must finish dialing all the digits before this timer expires.
0-64800 seconds 0 20-03-03
20-03-04
Item
No.
Item Input Data Default
Related
Program