Filter
Top Products
Program 10 : System Configuration Setup
10-08 : Pre-Ringing Setup
Aspire Software Manual Programming ◆ 743
10-08 : Pre-Ringing Setup
Description
Use Program 10-08 : Pre-Ringing Setup to enable or disable pre-ringing for trunk calls. This sets
how a trunk initially rings a telephone. With pre-ringing, a burst of ringing occurs as soon as the
trunk’s LED flashes. The call then continues ringing with the normal ring cadence cycle. Without
pre-ringing, the call starts ringing only when the normal ring cadence cycle occurs. This may cause
a ring delay, depending on when call detection occurs in reference to the ring cycle.
Input Data
Conditions
None
Feature Cross Reference
● Central Office Calls, Answering
Level:
Aspire S Aspire M/L/XL
IN • Available. • Available.
Item No. Description Input Data Default
01 Pre-Ringing Setup 0 = disable
1 = enable
Prior to 2.13 Software:
1
With 2.13+ Software:
0