Filter
Top Products
Traffic Reports
586 ◆ Features Aspire Software Manual
Traffic Total Report - Sample Report
Programming
➻
90-20-01 : Traffic Report Data Setup - Call Traffic Output
Determine whether or not the Call Traffic Output should be measured (0=no, 1=yes).
➻ 90-21-01 : Traffic Report Output
Define the output port to be used for the traffic reports (0=no setting, 1=NTCPU COM port,
2=NTCPU USB port). The reports will print hourly when connected to the output device.
Related Features
Data Communications
TMS Reports require connection to the serial or USB connector on the NTCPU. Additional pro-
gramming and a customer-provided printer are also required. Refer to the system Hardware Man-
ual for more on setting up and connecting to the Aspire system.
Station Message Detail Recording
SMDR provides additional information about the system’s trunk calling patterns. Refer to Station
Message Detail Recording (page 519) for more.
<< CALL TRAFFIC INFORMATION >> 09/09/05 15:00 Page:01
Tel/Co OTG OTGtime Charge ICM ANS ICMtime Ringing Abandon
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
302 4 00:01:10 0 0 0 00:00:00 00:00:00 0
303 1 00:00:11 0 0 2 00:03:15 00:00:00 0
306 1 00:10:57 0 0 0 00:00:00 00:00:00 0
346 0 00:14:23 0 0 2 00:01:03 00:00:00 0
LINE 001 2 00:12:57 0 0 0 00:00:00 00:00:00 0
LINE 002 5 00:23:30 0 3 3 00:00:25 00:00:20 0
LINE 003 1 00:17:10 0 1 1 00:00:53 00:00:04 0
LINE 004 4 00:08:11 0 0 0 00:00:00 00:00:33 2
Definitions
Terminal Terminal Number/Called Party Number (maximum 24 digits)
OTG Outgoing Call Frequency/number of outgoing calls (maximum 65535 calls)
Duration Call Duration for an Outgoing Call
Cost Call Charge
ICM Incoming Call Frequency/number of incoming calls (maximum 65535 calls)
Answer Answer Frequency (maximum 65535 calls)
Duration Call Duration for an Incoming Call
Ringing Ringing Duration
Abandon Number of Abandoned Calls (maximum 65535 calls)