Filter
Top Products
Networking
438 ◆ Features Aspire Software Manual
With Two Local Voice Mails, Network ID Must Match in Programming
With a networked system, with each system having their own voice mail, in order for users to prop-
erly connect to the correct voice mail when leaving a message, the programming must be set as
described below.
PRI Networking
Each node on a networked Aspire system is defined in Program 10-03-11 : PCB Setup - Net-
working System Number for the desired PRI slot. In the local system (Site 1), Program 11-
01-01 : System Numbering has a digit defined for networking (example: 7x=8 (network)).
The ID entry in Program 10-03-11 must match the ID set in Program 11-01-01. Otherwise,
callers could not press "8" to leave a message at a networked user’s voice mail. For example:
● In Site 1 in Program 10-03-11 = 1, Program 11-01-01 7X=8, ID = 2.
When Site 1’s extension 301 calls Site 2’s extension 401, then presses digit "8", the
user would hear a reorder tone.
● In Site 1 in Program 10-03-11 = 1, Program 11-01-01 7X=8, ID = 1.
When Site 1’s extension 301 calls Site 2’s extension 401, then presses digit "8", the
user will hear the voice mail message for extension 401.
Note that in order to assign a system ID, the "type" must temporarily be set to "8" (network-
ing). Once the system ID has been assigned, you can change the type to the required entry (2).
Programming
1. Set Program 11-01-01 to "8" (networking) for the local and remote voice mail master
numbers and define the ID number.
2. Set the local system ID in Program 10-03-11 to the same entry defined in Program 11-01-
01.
3. Change Program 11-01-01 for the local voice mail master number back to "2" (extension
number).
Refer to the example below:
Connected Via
PRI
Program 10-03-11 : PCB Setup,
Networking System Number
Program 10-03-11 : PCB Setup, Net-
working System Number
= 1 = 2
Program 11-01-01 : System Numbering Program 11-01-01 : System Numbering
Digit 7:
71 = 3 Digits
Type 8 (Networking)
System ID: 1
70 = 3 Digits
Type 2 (Extension)
System ID: 1 (must temporarily
change to Type 8 to be able to
enter the system ID)
Digit 7:
71 = 3 Digits
Type 2 (Extension)
System ID: 2 (must
temporarily change to
Type 8 to be able to enter
the system ID)
70 = 3 Digits
Type 8 (Networking)
System ID: 2
Voice Mail
700
System 1
System 2
Voice Mail
710