Filter
Top Products
Program 15 : Extension, Basic Setup
15-02 : Multi-Line Telephone Basic Data Setup
Aspire Software Manual Programming ◆ 903
09 Ringing Line Preference for Inter-
com Calls
Use this option to select between Idle
and Ringing Line Preference for Inter-
com calls.
0 = Idle (off)
1 = Ringing (on)
1
10 Ringing Line Preference for Trunk
Calls
Use this option to select between Idle
and Ringing Line Preference for trunk
calls.
0 = Idle (off)
1 = Ringing (on)
1
11 Callback Automatic Answer
Use this option to enable or disable
automatic answer for Callbacks. If
enabled, extension automatically
answers Callback ring when user lifts
the handset. If disabled, use must press
line appearance key to answer Call-
back.
0 = off
1 = on
1
12 Off Hook Ringing
Use this option to set the keyset’s off
hook signaling. Off hook signaling
occurs when a keyset user receives a
second call while busy on a handset
call. DID, DNIS and DIL trunks can
use any of the 4 options - normal/ring
group trunks can only use options “0”
or “1”. To enable/disable Off Hook
Signaling for an extension’s Class of
Service, use Program 20-13-06.
0 = Muted Off Hook Ringing
1 = No Off Hook Ringing
2 = Not Used
3 = Beep in Speaker
4 = Beep in Handset
0
13 Redial List Mode
Select whether the Redial List feature
should store internal and external
numbers (0), or only external numbers
(1).
0 = Extension/Trunk Mode
1 = Trunk Mode
1
14 - Not Used - -
15 Storage of Caller-ID for answered call 0 = Disable
1 = Enable
1
16 Handsfree Operation
Enable or disable an extensions ability
to use the speakerphone on outside
calls. Users can hear the conversation,
but cannot respond handsfree.
0 = Disable
1 = Enable
1
17 - Not Used - -
18 Power-saving mode 0 = Normal mode
1 = Power-saving mode
1
Item
No.
Item Input Data Default
Related
Program