Filter
Top Products
ISDN Compatibility
378 ◆ Features Aspire Software Manual
➻ 21-12-01 : ISDN Calling Party Number Setup for Trunks
Assign Calling Party Numbers for each trunk (maximum 16 digits per entry). When a call is
made by an extension which does not have an Extension Calling Number assigned (Program
21-13), the system sends the calling number for the ISDN trunk defined in 21-12. If the Call-
ing Party Number is assigned in both Programs 21-12 and 21-13, the system sends the data in
Program 21-13.
➻ 21-13-01 : ISDN Calling Party Number Setup for Extensions
Assign each extension a Calling Party Number (maximum 16 digits per entry). The calling
number is the subscriber number of the dial-in number. When a call is made by an extension
which does not have an Extension Calling Number assigned (Program 21-12), the system sends
the calling number for the ISDN trunk defined in Program 21-13. If a Calling Party Number is
assigned in both Programs 21-12 and 21-13, the system sends the data in Program 21-13 if
allowed in Program 20-08-13.
➻ 22-02-01 : Incoming Call Trunk Setup
Assign the incoming trunk type for each trunk. There is one item for each Night Service
Mode.
➻ 22-11-01 : DID Translation Table Number Conversion
Specify for each Translation Table entry (2000):
● The digits received by the system (eight max.)
● The extension the system dials after translation (24 digits max.)
● The name that should show on the dialed extension’s display when it rings (twelve charac-
ters max.)
● The Transfer Target-1 and 2
● If the Transfer Targets are busy or receive no answer, those calls are transferred to the final
transfer destination (Program 22-10).
● Operation mode
➻ 24-02-09: System Options for Transfer - ISDN Transfer Resend Timer
Determine how long the system should resend a Facility Message to the currently active PRI
trunk when the 2 B-Channel Transfer feature is used. The system will resend the Facility timer
based on this timer. If there is no response after the 3rd resend, the system considers the trans-
fer as failed and stops resending. (Entries: 1-30 seconds, Default Setting: 10 seconds)
➻ 99-01-32 : MF Options - Type of Number (software 4.08-4.0W)
Use this option to define the ISDN numbering plan to allow the calling party information to be
passed to some telcos. Note that this program is changed to Program 10-03-18 with soft-
ware 4.93+. (1=Unknown, 2=International number, 3=National number, 4=Network Specific
number, 5=Subscriber number, 6=Abbreviated number - Default: National number)
➻ 99-01-33 : MF Options - Numbering Plan Identification (software 4.08-4.0W)
Use this option to define the ISDN numbering plan to allow the calling party information to be
passed to some telcos. Note that this program is changed to Program 10-03-19 with soft-
ware 4.93+. (1=Unknown, 2=International number, 3=National number, 4=Network Specific
number, 5=Subscriber number, 6=Abbreviated number - Default :ISDN numbering plan)