Filter
Top Products
i-Series Telephones
362 ◆ Features Aspire Software Manual
When using i-Series phones on the Aspire system, the following features are NOT supported:
● Directory Dial
● Super Display Operation
● Soft Keys
● Headset Key
● Changing Incoming CO and ICM Ring Tones (Program 11-11-20)
● Telephone System Programming (#*#*)
● Program 10-03 : PCB Setup (DSTU PCB has no programmable options)
● Program 90-17-01 : Display Firmware Version
● Program 90-07-01 : Extension Control
In addition to the above, the 92290x, 92670, 92370x, 92570, 92560, and 92760 phones do NOT
support:
● Check Abandon Calls (CHECK + CALL2)
● Check Port/Name (CHECK + CALL1)
● Name Program (Service Code 800)
● Language Display (Program 15-02-01)
● Time and Display Modes (Program 20-02-07)
Call History/Caller ID Lists Do Not Provide Delete Function
With software 4.93-4.95, the display of the Call History/Caller ID list was enhanced to provide the
ability to delete one or all numbers currently displaying in the Caller ID list.
With this change, however, when reviewing the numbers in the list, when the last number in the list
was viewed, it would then scroll back to the first number - it did not stop. With this change, the
i-Series phones did not have the option to clear the list by pressing CHECK + 9 (CHECK + 0 aborts
the deletion).
This has been changed with this release so that the list will now stop at the last number when
reviewing using an i-Series phone.
Conditions:
● As the Aspire keysets provide 24-character displays and the i-Series keysets provide 20-char-
acter displays, the i-Series phones will not indicate any characters over the 20-character limit.
● Some languages are not supported by the i-Series phones (such as Norwegian and Danish)
due to the LCD controller differences between the i-Series and Aspire phones.
● The NSL is not supported with Aspire Mail.
● Using the Caller ID Check List feature requires an Incoming Call Log Programmable Func-
tion Key (15-07-01, code 08) in order to view the list.
Default Setting
Enabled
Refer to the DSTU PCB Installation Instructions, P/N 0893106, for details on installing the PCB.