Filter
Top Products
Tandem Trunking (Unsupervised Conference)
Aspire Software Manual Features ◆ 551
➻ 25-07-08 : System Timers for VRS/DISA - DISA Long Conversation Disconnect Timer
This timer determines how long the system will wait (0 - 64800 seconds) before disconnecting
a DISA call after the Long Conversation tone is heard. This program has no affect if Program
25-07-07 is set to "0".
➻ 80-01-35 : Service Tone Setup - 1 Second Signal Tone
If required, adjust the warning tone heard by the user when Program 24-02-07 or 25-07-07 expires.
Multiple Trunk Conference, Method A - From Conference
➻ 10-07-01 : Conversation Record Circuits
The number of circuits assigned as Conversation Record circuits limits the number of avail-
able Conference circuits. Make sure there are circuits available for Conference.
➻ 11-12-57 : Service Code Setup (for Service Access) - Tandem Trunking/Unsupervised
Conference
If the default service code (#8) for Tandem Trunking is not acceptable, change the code as
required.
➻ 14-01-04 : Basic Trunk Data Setup - Transmit Gain Level for Conference and Transfer
Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
➻ 14-01-05 : Basic Trunk Data Setup - Receive Gain Level for Conference and Transfer
Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
➻ 14-01-13 : Basic Trunk Data Setup - Loop Supervision
For each trunk that should be able to participate in a tandem call, enter 1.
➻ 14-02-09 : Analog Trunk Data Setup - Busy Tone Detector
If this option is enabled (1) for a trunk, if there is no DSP resource available, the Multiple
Trunk Conference cannot be completed.
➻ 15-07-01 : Programmable Function Keys
(Optional) Assign a function key for Transfer (code 06).
➻ 20-06-01 : Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
➻ 20-07-11 : Class of Service Options (Administrator Level) - Forced Trunk Disconnect
In an extension’s Class of Service, enter 1 to enable Forced Trunk Disconnect. This allows the
extension to disconnect an Unsupervised Conference in progress.
➻ 20-13-08 : Class of Service Options (Supplementary Service) - Conference
In an extension’s Class of Service, enable (1) or disable (0) the extension’s ability to initiate a
Conference.
➻ 20-13-10 : Class of Service Options (Supplementary Service) - Barge In Mode
In an extension’s Class of Service, set whether an extension should be able to Barge In to a
call and talk (1) or just monitor the call (0).
➻ 24-02-07 : System Options for Transfer - Forced Release for Trunk-to-Trunk Transfer
This timer will start when a trunk begins talking with another trunk (for example: trunk-to-
trunk transfer, outgoing from trunk, Tandem Trunking) (0-64800).