Filter
Top Products
Distinctive Ringing, Tones and Flash Patterns
318 ◆ Features Aspire Software Manual
Distinctive Ringing, Tones and Flash Patterns
Description
Distinctive Ringing, Tones and Flash Patterns provide extension users with audible and visual call
status signals. This lets users tell the types of calls by listening to the ringing/tones and watching
the keys. It also helps users monitor the progress of their calls. In addition, Distinctive Ringing lets
keyset users customize their Intercom and trunk call ringing. This is helpful for users that work
together closely. For example, if several co- workers set their keysets to ring at different pitches,
the co-workers can always tell which calls are for them. Refer to the following table at the begin-
ning of this section:
You can also customize the tones the system uses for splash tone, confirmation tone, trunk ring
tone, Intercom ring tone and Alarm ring tone. Refer to the chart below and the Programming sec-
tion for more details.
Conditions
None
Default Setting
Enabled.
Aspire S Aspire M/L/XL
• Available. • Available.
Table 1-7 System Tones
Distinctive Ringing, Tones and Flash Patterns
Program Description
80-01 : Service Tone Setup Set the frequency of the system’s splash tone. This is the
tone the system uses, for example, to alert the user of an
incoming voice-announced Intercom call.
82-01 : Incoming Ring Tone Set the trunk ring tones, which are the tones a user hears
when a trunk rings an extension.
82-01 : Intercom and Alarm Ring
Tone
Set the Intercom and External Alarm Sensor ring tones.
82-03 : DSS Console LED Pattern
Setup
and
30-05 : DSS Console Lamp Table
Set the DSS and Hotline key flash rates for busy, idle,
DND, ACD Agent status, and hotel options.