Filter
Top Products
Tandem Trunking (Unsupervised Conference)
Aspire Software Manual Features ◆ 549
➻ 25-07-07 : System Timers for VRS/DISA -DISA/Tandem Trunking Long Conversation
Warning Tone Time
Determine the length of time a DISA caller or any trunk-to-trunk (such as Tandem Trunking)
conversation can talk before the Long Conversation tone is heard (0-64800 seconds).
➻ 25-07-08 : System Timers for VRS/DISA - DISA/Tandem Trunking Long Conversation
Disconnect
This timer determines how long the system will wait before disconnecting a a DISA or any
trunk-to-trunk (such as Tandem Trunking) call after the Long Conversation tone is heard (0-
64800 seconds).
Tandem Trunking Method D - Tandem Trunking to Abbreviated Dial Number
➻ 10-07-01 : Conversation Record Circuits
The number of circuits assigned as Conversation Record circuits limits the number of avail-
able Conference circuits. Make sure there are circuits available for Conference.
➻ 11-10-06 : Service Code Setup (for System Administrator) - Setting the Automatic For-
warding for Each Trunk Line
If the default service code (833) for enabling Automatic Tandem Trunking feature is not
acceptable, change the code as required.
➻ 11-10-07 : Service Code Setup (for System Administrator) - Canceling the Automatic
Forwarding for Each Trunk Line
If the default service code (834) for canceling Automatic Tandem Trunking feature is not
acceptable, change the code as required.
➻ 11-10-08 : Service Code Setup (for System Administrator) - Setting the Destination for
Automatic Trunk Forwarding
If the default service code (835) for setting the destination of the Automatic Tandem Trunking
feature is not acceptable, change the code as required.
➻ 13-04-01 : Abbreviated Dialing Number and Name
Enter the number and names for the bins used to hold the Automatic Tandem Trunking destination.
➻ 14-01-04 : Basic Trunk Data Setup - Transmit Gain Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
➻ 14-01-05 : Basic Trunk Data Setup - Receive Gain Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
➻ 14-01-13 : Basic Trunk Data Setup - Loop Disconnect Supervision
For each trunk, enter 1 to enable loop supervision.
➻ 20-06-01 : Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
➻ 20-07-05 : Class of Service Options (Administrator Level) - Set/Cancel Automatic
Trunk-to-Trunk Forwarding
Enable (1) or disable (0) an extension’s ability to use the Trunk-to-Trunk Forwarding service
codes.
➻ 20-07-11 : Class of Service Options (Administrator Level) - Forced Trunk Disconnect
In an extension’s Class of Service, enter 1 to enable Forced Trunk Disconnect. This allows the
extension to disconnect an Unsupervised Conference in progress.
➻ 24-02-07 : System Options for Transfer - Forced Release for Trunk-to-Trunk Transfer
This timer will start when a trunk begins talking with another trunk (for example: trunk-to-
trunk transfer, outgoing from trunk, Tandem Trunking) (0-64800).