Filter
Top Products
Call Forwarding
154 ◆ Features Aspire Software Manual
When Call Forward Follow Me is set up in a chain, forwarding cannot be canceled by the middle
keyset (as shown in the example below) while on a call.
Conditions
(A.) Normally, the system does not allow the chaining of Call Forwards. For example, extension
316 forwards to 318, and 318 in turn forwards to 320. Calls to 316 route to 318. Calls to 318
route to 320. The system does allow a single chain, however, if the second extension in the
chain is forwarded off- premise (*46 + trunk access code + destination telephone number).
(B.) Periodic reminder message requires a DSP daughter board for Voice Response System (VRS).
(C.) Call Forwarding an extension in a Department Group will prevent that extension from receiv-
ing Department Pilot Calls.
(D.) If a Programmable Function key is not defined for Call Forwarding (10 - 17), the DND key
flashes to indicate that the extension is call forwarded.
(E.) Ring Groups do not follow Call Forward to voice mail.
(F.) Multiple Directory and Call Coverage Key calls do not follow Call Forwarding.
(G.) When upgrading system software to 2.63, any users which previously had Call Forwarding
Busy/No Answer defined for the Call Forward to Station key will need to redefine the key’s
operation. Otherwise, the "no answer" forwarding will not function.
Default Setting
Enabled.
Keyset A
Keyset B
Keyset C
Keyset B sets
Follow Me forwarding
for Keyset C
Keyset A sets
Follow Me forwarding
for Keyset B