Filter
Top Products
SA-1110 Developer’s Manual 395
DC Parameters
12.3 Power Supply Voltages and Currents
Table 12-3 specifies the power supply voltages and currents for the SA-1110
.
Note: Only maximum values are guaranteed by manufacturing test screen. Due to end-of-life status for
B1 components, B-1 data has been eliminated from Table 12-3.
Table 12-3. SA-1110 Power Supply Voltages and Currents
Parameter AC, AD (133 MHz) BC, BD (206 MHz)
Maximum Run Mode Power 500 mW 1000mW
Typical Run Mode Power
1
200 mW 350 mW
Maximum Idle Mode Power
2
100 mW 200 mW
Typical Idle Mode Power
2
75 mW 100 mW
Maximum Sleep Mode Current
2
75 u A 75 u A
Typical Sleep Mode Current
2
50 u A 50 uA
Vddi Max 1.63 V 2.10 V
Vddi Typ 1.55 V 1.75 V
Vddi Min 1.47 V 1.65 V
Vddx Max 3.60 V 3.60 V
Vddx Typ 3.30 V 3.30 V
Vddx Min 3.00 V 3.00 V
NOTES:
1. Typical operation defined using the following parameters:
320x240 LCD operating at 70 fps (passive color LCD,
8-bit color depth, single panel (1 DMA unit); and
UART3 transmitting and receiving 115.2 kbps (using 2 DMA units).
2. Room Temperature