Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Configuring BGP IP VPN
2-47
DES-7200(config)# interface
interface-name
Configure the interface connecting CE.
DES-7200(config-if)#
label-switching
Enable MPLS forwarding.
DES-7200(config-if)# mpls ip
Enable LDP.
DES-7200(config-if)# ip ref
In case of a router, enable fast forwarding (not
applicable to a switch).
DES-7200(config-if)# end
Exit interface configuration mode.
DES-7200# show running-config
Display existing configurations.
DES-7200# show mpls ldp
bindings vrf vrf-name
Display LDP label binding information under this
VRF instance.
The configuration steps of CE are shown below:
Command Function
DES-7200(config)# mpls router
ldp
Enable LDP (CE).
DES-7200(config-mpls-router)#
ldp router-id interface
interface-name force
Configure the RouterID of LDP.
DES-7200(config-mpls-router)#
exit
Exit LDP instance configuration mode.
DES-7200(config)# interface
interface-name
Configure the interface connecting PE.
DES-7200(config-if)#
label-switching
Enable MPLS forwarding.
DES-7200(config-if)# mpls ip
Enable LDP.
DES-7200(config-if)# end
Exit interface configuration mode.
DES-7200# show running-config
Display existing configurations.
DES-7200(config-if)# ip ref
In case of a router, enable fast forwarding (not
applicable to a switch).
DES-7200# show mpls ldp
bindings
Display LDP label binding information.