Filter
Top Products
DES-7200 Configuration Guide Chapter 5 System Upgrade Configuration
*Apr 1 06:20:08: %AUTO_UPGRADE-6-VER_SYNC_SUCCEED: Version synchronization for
The following is an example of dynamically inserting a line card with incompatible
00 device (running 10.4(2) or higher version):
These images in linecard will be updated:
age
---- - --
IN 7200-24
-------------------------------------
LOT_BEG: (Slot 3): Installing MAIN
*Aug
et.
:06: %UPGRADE-5-DISPATCH_BEGIN: Dispatch image to slot 3.
Download image to slot 3: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Waiting for image installed....Complete
line card in slot [5] has been succeeded.
software version in the DES-72
Slot im linecard
----------------
--
3 MA
*Aug 7 07:46:25: %UPGRADE-5-S
(Slot 3): Download image
7 07:47:21: %UPGRADE-5-SLOT_SUCC: (Slot 3): MAIN installed.
*Aug 7 07:47:21: %UPGRADE-5-SLOT_FIN: (Slot 3): All images is installed.
*Aug 7 07:47:21: %UPGRADE-5-RESET_CARD: (Slot 3): Res
The following is an example of dynamically inserting a line card with compatible
software version (only when the master management board is running 10.4(2) or
higher version):
*Apr 2 07:39
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!![OK - 8,007,680 bytes]
Caution
UPGRADE-4-CARDNOTSUPPORT: The linecard in slot 1/4 is not
supportted by current version.
When line card inserted cannot be supported by the existing
master management board, the system will prompt:
5.3.2.5 Upgrade of Stacked Devices
Upgrade of stacked devices will be activated under the following two circumstances:
upgrade steps are same as those of cabinet devices.
Upgrade of all stacked devices
This case is applicable to the upgrade of devices having completed stacking. The
5-19