Filter
Top Products
DES-7200 Configuration Guide Chapter 1 VRRP Configuration
1-12
1.4.1 show vrrp
Our product provides the following show vrrp commands to check the VRRP status of
the local router.
Command Purpose
DES-7200# show vrrp [brief | group]
Check the current VRRP status
DES-7200# show vrrp interface type
number [brief]
Show the VRRP status of the specified
network interface
Here are some examples of the command:
1. show vrrp command
DES-7200# show vrrp
GigabitEthernetFastEthernet 0/10 - Group 1
State is Backup
Virtual IP address is 192.168.201.1 configured
Virtual MAC address is 0000.5e00.0101
Advertisement interval is 3 sec
Preemption is enabled
min delay is 0 sec
Priority is 100
Master Router is 192.168.201.213 , pritority is 120
Master Advertisement interval is 3 sec
Master Down interval is 9 sec
GigabitEthernetFastEthernet 0/20 - Group 2
State is Master
Virtual IP address is 192.168.201.2 configured
Virtual MAC address is 0000.5e00.0102
Advertisement interval is 3 sec
Preemption is enabled
min delay is 0 sec
Priority is 120
Master Router is 192.168.201.217 (local), priority is 120
Master Advertisement interval is 3 sec
Master Down interval is 9 sec
The displayed messages above include the Ethernet name, VRRP backup group
number configured on the interface, status, priority, preemption mode, VRRP
advertisement interval, virtual IP address, virtual MAC address, Master router IP
address, Master router priority, Master router advertisement interval, Master router
failure judgment interval, current interface monitored by the VRRP backup group and
corresponding priority change scale.
The current interface monitored by the VRRP backup group and the corresponding
priority change metrics can be shown only after the monitoring interface function is
enabled.
2. show vrrp brief command