DES-7200 Configuration Guide Chapter 7 Protocol VLAN Configuration
7-6
7.4 Typical Protocol VLAN
Configuration Examples
7.4.1 Example of
protocol-based
VLAN
configuration
7.4.1.1 Network Topology
Diagram for protocol-based VLAN configuration
7.4.1.2 Application Requirements
The above figure shows the structure of a Windows NT and Novell Netware
interconnected network. The office zone is connected to the layer-3 device of
Switch A through Hub. There are different PC users distributed in the office zone,
with certain users using Windows NT operating system and supporting IP
protocol and other users using Novell Netware operating system and supporting
IPX protocol. The entire office zone is connected to Internet and server via the
uplink port of Gi 0/3.
Networking requirement:
¾ Implement layer-2 isolation between Windows NT users and Novell
Netware users in order to lessen network traffic.
7.4.1.3 Configuration Tips
Configuration tips: