Filter
Top Products
DES-7200 Configuration Guide Chapter 9 NLB Group Configuration
9-7
DES-7200(config)# nlb-group 1 vrf ac ip 192.168.10.1 reflector-port
gigabitethernet 0/3
# Configure the port connection cluster group 1 and device
DES-7200(config)# nlb-group 1 destination-port gigabitethernet 0/1, 0/2
9.4.5 Verification
In privilege mode, execute "show nlb-group" command to display
configurations of the existing cluster group. The following example shows
show to display the current state of cluster group 1 through "show nlb-group"
command.
DES-7200# show nlb-group 1
group-number： 1
cluster-vrf: ac
cluster-ip: 192.168.1.10
destination-port : Gi 0/1, Gi 0/2, Gi 0/3