Filter
Top Products
DES-7200 Configuration Guide Chapter 6 BGP
Configuration
6-9
Command Function
DES-7200(config-router)# neighbor
{address | peer-group-name}
remove-private-as
(Optional) Configure to delete the
private AS number in the AS path
attribute when distributing the route
information to the EBGP peer
(group).
DES-7200(config-router)# neighbor
{address |
peer-group-name}send-community
(Optional) Configure to send the
community attribute to the specified
BGP peer (group).
DES-7200(config-router)# neighbor
{address | peer-group-name}
maximum-prefix maximum
[warning-only]
(Optional) Limit the number of the
route information received from the
specified BGP peer (group).
DES-7200(config-router)# neighbor
{address | peer-group-name}
distribute-list access-list-name {in |
out}
(Optional) Configure to implement
the routing police according to the
access control list when the route
information is received from and sent
to the specified BGP peer (group).
DES-7200(config-router)# neighbor
{address | peer-group-name}
prefix-list prefix-list-name {in | out}
(Optional) Configure to implement
the routing policy according to the
prefix list when the route information
is received from and sent to specified
BGP peer (group).
DES-7200(config-router)# neighbor
{address | peer-group-name}
route-map map-tag {in | out}
(Optional) Configure to implement
the routing policy according to the
route-map when the route
information is received from and sent
to the specified BGP peer (group).
DES-7200(config-router)# neighbor
{address | peer-group-name} filter-list
path-list-name {in | out}
(Optional) Configure to implement
the routing policy according to the AS
path list when the route information is
received from and sent to the
specified BGP peer (group).
DES-7200(config-router)# neighbor
{address | peer-group-name}
unsuppress-map map-tag
(Optional) Configure to selectively
advertise the route information
suppressed by the
aggregate-address command
previously when it is distributed to the
specified BGP peer.
DES-7200(config-router)# neighbor
{address | peer-group-name}
(Optional) Restart the BGP session
and reserve the unchanged route