Filter
Top Products
DES-7200 Configuration Guide Chapter 4 DHCP Configuration
4-16
4.5.9 Configuring the
DHCP Client on the
Ethernet Interface
DES-7200 products support obtaining the IP address dynamicaly assigned by
the DHCP server on an Ethernet interface.
To configure the DHCP client on the Ethernet port, execute the following
command in the interface configuration mode:
Command Function
DES-7200(config-if)# ip address dhcp
Obtain an IP address through DHCP.
4.5.10 Configuring the
DHCP Client in the
PPP Encapsulation
Link
DES-7200 products support obtaining the IP address dynamicaly assigned by
the DHCP server on a PPP encapsulation interface.
To configure the DHCP client, execute the following command in the interface
configuration mode:
Command Function
DES-7200(config-if)# ip address dhcp
Obtain an IP address through DHCP.
4.5.11 Configuring the
DHCP Client in the
FR Encapsulation
Link
DES-7200 products support obtaining the IP address dynamicaly assigned by
the DHCP server on an FR encapsulation interface.
To configure the DHCP client, execute the following command in the interface
configuration mode:
Command Function
DES-7200(config-if)# ip address dhcp
Obtain an IP address through DHCP.