Filter
Top Products
DES-7200 Configuration Guide Chapter 4 802.1x Configuration
4-49
4.3.3 Viewing the Authenticable
Address Table
Our 802.1x has expanded functions that allow you to set the hosts that can be authenticated
on a particular port. This function allows the administrator to view the currently available
settings.
In the privileged mode, you can view the list of hosts authenticable by performing the following
steps:
Command Function
configure terminal
Enter the global configuration mode.
dot1x auth-address-table address
mac-addr interface interface
Set the list of the hosts that can be authenticated.
end
Return to the privileged mode.
write
Save the configuration.
show dot1x auth-address-table
Show the list of the hosts that can be authenticated.
Use the no dot1x auth-address-table address command to delete the specified
authenticable host list. The following example shows the list of the hosts that can be
authenticated.
DES-7200# show dot1x auth-address-table
interface:g3/1
-----------------------------------
mac addr: 00D0.F800.0001
4.3.4 Viewing the User
Authentication Status
Information
The administrator can view the authentication status of the current users of the switch for
easier troubleshooting.
In the privileged mode, you can view the user authentication status information by performing
the following steps:
Command Function
show dot1x summary
Viewing the User Authentication Status Information
The following example shows the user authentication status information.
DES-7200# show dot1x summary
ID MAC Interface VLAN Auth-State Backend-State Port-Status
---- ----------- --------- ---- ---------- ------------ -----------
1 00d0f8000001 Gi3/1 1 Authenticated IDLE Authed