Filter
Top Products
DES-7200 Configuration Guide Chapter 1 WEB Management Configuration
the name of the file after the upgrade. Enter the IP address of the TFTP server and click
Upgrade to validate the configuration.
1.3.6.8 Exiting the System
Use the Exiting system menu item to enable the function.
Configuration Description:
Click the Exiting system menu item to close the browser window.
1.3.7 Viewing the Configuration
None.
1.4 Typical Configuration Example
for WEB Management
1.4.1 Configuration Keypoints
If the WEB service is enabled, the authentication for WEB management adopts the Enable
mode by default.
1.4.2 Configuration steps
The login authentication for WEB management adopts the Local or Enable mode. Users can
enter the WEB management page to perform WEB configuration only when the
authentication succeeds.
1) Perform login authentication in the Local method.
The detailed configuration is shown as follows.
a. Enter the config mode.
DES-7200#configure
Enter configuration commands, one per line. End with CNTL/Z.
b. Enable the WEB service.
DES-7200(config)#enable service WEB-server
c. Configure the login authentication method for WEB management to Local.
DES-7200(config)#ip http authentication local
d. Configure the local user name (class 15 users) and password.
DES-7200(config)#user name admin password admin
DES-7200(config)#user name admin privilege 15
1-40