Filter
Top Products
DES-7200 Configuration Guide Chapter 1 SNMP
Configuration
Showing Information Description
Too big errors (Maximum packet size
1500)
Too large response message
No such name errors
Not in the specified management
unit
Bad values errors Specified value type error
General errors General error
Get-response PDUs Get-response message
SNMP trap PDUs SNMP trap message
1.3.2 Checking the MIB Objects
Supported by the Current
SNMP Agent
To check the MIB objects supported by the current SNMP Agent, run the show
snmp mib command in the privileged mode:
DES-7200# show snmp mib
sysDescr
sysObjectID
sysUpTime
sysContact
sysName
sysLocation
sysServices
sysORLastChange
snmpInPkts
snmpOutPkts
snmpInBadVersions
snmpInBadCommunityNames
snmpInBadCommunityUses
snmpInASNParseErrs
snmpInTooBigs
snmpInNoSuchNames
snmpInBadValues
snmpInReadOnlys
snmpInGenErrs
snmpInTotalReqVars
snmpInTotalSetVars
snmpInGetRequests
snmpInGetNexts
snmpInSetRequests
snmpInGetResponses
snmpInTraps
snmpOutTooBigs
snmpOutNoSuchNames
snmpOutBadValues
snmpOutGenErrs
1-12