Filter
Top Products
DES-7200 Configuration Guide Chapter 12 NFPP Configuration
12-87
Command Function
DES-7200# configure terminal
Enter the global configuration mode.
DES-7200(config)# nfpp
Enter the nfpp configuration mode.
DES-7200(config-nfpp)# log-buffer logs
number_of_message interval
length_in_seconds
Set the rate of generating the syslog
from the NFPP syslog buffer area.
number_of_message
/length_in_seconds: The rate of
generating the syslog. The
correspondent information in the
NFPP syslog buffer area will be
removed while generating the syslog.
number_of_message: The valid range
is 0-1024, the default value is 1. 0
indicates that all syslogs are recorded
in the NFPP syslog buffer area and
the syslog is not generated.
length_in_seconds: The valid range is
0-86400s(one day), the default value
is 30s. 0 indicates to generate the
syslog immediately.
Setting the number_of_message and
the length_in_seconds 0 indicates to
generate the syslog immediately.
DES-7200(config-nfpp)# end
Return to the privileged EXEC mode.
DES-7200# show nfpp log summary
Show the configurations.
12.10.4 Configuring NFPP
syslog filtering
The administrator can filter the NFPP syslog and record the syslog in the specific VLAN or on
the specific interface.
Command Function
DES-7200# configure terminal
Enter the global configuration mode.
DES-7200(config)# nfpp
Enter the nfpp configuration mode.