Filter
Top Products
DES-7200 Configuration Guide Chapter 6 RSPAN
Configuration
D r session
se stination remote vlan vlan-id
in ace-name [switch]
Configure Remote VLAN and the remote
mirroring destination port.
switch indicates the destination port joins
switching.
ES-7200(config)# monito
ssion-num de
terface interf
D ce interface-name
Enter the remote mirrorring destination port.
ES-7200(config)# interfa
DES-7200(config-if)# { switchport access vlan
vid | switchport trunk native vlan vid }
Vid: VID for remote-span vlan.
If the destination port is acess port, join the
destination port to remote-span vlan;
If the destination port is trunk port, join the
destination port to remote-span vlan and set
the remote-span vlan as the native vlan for
the destination port.
6.2.5 Configuring Flow-baed
RSPAN
As the expansion of local SPAN, RSPAN supports flow-based mirroring as well. For
onfiguration Guide.
details, refer to Mirroring C
Note
Flow-based RSPAN brings no influence on communications.
Users can set ACL at the inbounding direction of the source port of the
source RSPAN switch. Standard ACL, extended ACL, MAC ACL a
user-defined ACL are supported.
Users can set port ACL at the inbounding direction of the source p
of the source RSPAN switch, and set port ACL at the outboundi
direction of the destination port of the destination RSPAN switch.
Users can apply ACL at the outbounding direction of Remote VL
the soruce RSPAN switch, and apply ACL at the inboudning direction
of Remote VLAN on the destination RSPAN switch.
nd
ort
ng
AN on
6.3 Showing RSPAN Session
Command Function
DES-7200# show monitor
Show the mirroring configuation.
F x
DES-7200# show monitor
sess-num: 1
src-intf:
or e ample:
6-9