Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Basic Switch Management
Configuration
4
5 3205120 2008-08-26 05:22:46 flash:/firmware.bin
/firmware_bak.bin
==================================================
et the boot priority of flash:/firmware_bak.bin to 1, run the following
and:
[flash:/firmware_bak.bin] has been configured with
rity 8,
ge the priority to [1]? [yes] yes
esult is that:
====================================
Size Modified Name
---- --------- ------------------- ------------------
1
3
05120 2008-08-26 05: mware.bin
6
7
8
9
10
=====================================
2.15.4 Delet
Prog
6
7
8 3205120 2008-08-26 05:25:09 flash:
9
10
====
To s
comm
DES-7200(config)# boot system 1 flash:/firmware_bak.bin
File
prio
Chan
The r
DES-7200# show boot system
Boot system config:
=================
Prio
3205120 2008-08-26 05:25:09 flash:/firmware_bak.bin
2
4
5 32
22:46 flash:/fir
=================
ing the Boot Main
ram
You can use the following comman main progd to delete the boot ram.
Command Function
DES-7200(Config)# no boot system
[priority]
Delete the boot main program. The boot priority is in the
range of 1 to 10 . if the priority is not set, all the boot main
programs will be reset.
2-23