Filter
Top Products
DES-7200 Configuration Guide Chapter 7 DHCPv6 Server Configuration
7-8
Fig 5. Server responding to the Information-request message
7.1.4 Protocol specification
DHCPv6 protocol specifications are detailed in RFC3315;
DHCPv6-PD protocol specifications are detailed in RFC3633;
7.2 Default configurations
The following table describes the default configurations of DHCPv6 Server.
Function Default setting
DHCPv6 Server function Disabled
DHCPv6 configuration information pool Not configured
7.3 Configure DHCPv6
Server
7.3.1 Configure DHCPv6
Server
This task involves how to create and configure a DHCPv6 configuration information
pool, and how to associate this pool with DHCPv6 Server on the interface. When this
DHCPv6 Server is enabled, it will be able to assign addresses and other
configuration information to clients. The configuration steps are shown below:
Command Function
DES-7200# configure terminal
Enter global configuration mode.
DES-7200(config)# ipv6 dhcp pool
poolname
Configure DHCPv6 configuration
information pool and enter pool
configuration mode.
DES-7200(config-dhcp)#
domain-name domain
Configure a domain-name that can be
assigned to DHCPv6 Client.