Filter
Top Products
DES-7200 Configuration Guide Chapter 3 RIPng
Configuration
3-9
DES-7200(config)# interface gigabitEthernet 0/1
DES-7200(config-if)# ipv6 enable
DES-7200(config-if)# ipv6 address 2001:db8::1/32
DES-7200(config-if)# ipv6 rip enable
DES-7200(config-if)# ipv6 rip default-information originate
metric 3
# Configure RIPng
DES-7200(config)# ipv6 router rip
DES-7200(config-router)# exit
Router B:
# Configure network interface.
DES-7200(config)# interface gigabitEthernet 0/1
DES-7200(config-if)# ipv6 enable
DES-7200(config-if)# ipv6 address 2001:db8::2/32
DES-7200(config-if)# ipv6 rip enable
# Configure RIPng.
DES-7200(config)# ipv6 router rip
DES-7200(config-router)# passive-interface default
DES-7200(config-router)# exit
Router C:
# Configure network interface.
DES-7200(config)# interface gigabitEthernet 0/1
DES-7200(config-if)# ipv6 enable
DES-7200(config-if)# ipv6 address 2001:db8::3/32
DES-7200(config-if)# ipv6 rip enable
# Configure RIPng.
DES-7200(config)# ipv6 router rip
DES-7200(config-router)# passive-interface default
DES-7200(config-router)# exit
3.3.2 Redistribution configuration
Configuration requirements
There are three devices (see Fig 1 for device connection). Router A runs RIPng;
Router C runs BGP and introduces static routes; Router B needs to redistribute
the static routes redistributed by Router C to RIPng domain.
In order to meet such requirements, we can configure the specified community