Filter
Top Products
DES-7200 Configuration Guide Chapter 6 Syslog Configuration
6-7
Command Function
DES-7200(config)# logging facility
facility-type
Configure the log information device value
DES-7200(config)# no logging facility
Restore the default o
facility-type
f the log information
device value
The meanings of various device values are described as below:
ed internally by syslogd
ubsystem
em
thorization messages
22 local use 6 (local6)
use 7 (local7)
ur products is 23.
6.2.11 Configuring the Source
Numerical Code Facility
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generat
6 line printer s
7 network news subsystem
8 UUCP subsyst
9 clock daemon
10 security/au
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
23 local
The default device value of o
Address of Log Messages
By default, the source address of the log messages sent to the syslog server is the
ommands.
To configu the source address of the log me n the following command in
the global nfiguration mode:
address of the port that sends the messages. It is possible to fix the source address for
all log messages through c
It is possible to directly set the source IP address of the log messages or the remote
port of the log messages.
re
co
ssages, ru
Command Function