Filter
Top Products
DES-7200 Configuration Guide Chapter 1 WEB Management Configuration
If the ARP detection function is already enabled on the selected port, the Enable ARP
detection function option button is selected. Otherwise the Disable ARP detection
function option button is selected by default.
1.3.3.4 ACL
Use the ACL menu item to enable the function.
ACL setting page
Figure 1-25 ACL setting
1) Displaying ACL Information
Configuration Description:
The Display ACL information interface is shown as the figure. In order to view the detailed
information of the specified ACL, select the ACL from the ACL drop-down list to display all
ACEs of the ACL. In order to delete an ACE, tick the check box and then click Delete to
validate the configuration. In order to delete the whole ACL, click Select All to select all
ACEs and click Delete to validate the configuration.
2) Configuring ACL
To configure the standard IP address access list, click Configure standard IP address
access list option button. The following figure is the interface of configuring standard IP
address access list.
1-22