Filter
Top Products
DES-7200 Configuration Guide Chapter 2 RADIUS Configuration
2-2
Typical RADIUS network configuration
2.2 RADIUS Configuration
Tasks
To configure Radius on the network device, perform the following tasks first:
z Enable AAA. For the details, see AAA Overview.
z Define the RADIUS authentication method list by using the aaa
authentication command. For details about how to use "aaa
authentication" to define the authentication method list, see Configuring
Authentication.
z Apply the defined authentication list on the specific line; otherwise the
default authentication list will be used for authentication. For more details,
see Configuring Authentication.
After the configuration is completed, you may start to configure the RADIUS. The configuration
of the RADIUS consists of the following parts:
z Configuring Radius Protocol Parameters
z Specify the RADIUS authentication.
2.2.1 Configuring
Radius
Protocol
Parameters
Before configuring the Radius on the network device, the network communication shall
operate perfectly on the Radius server. To configure RADIUS protocol parameters, run the
following commands: