Filter
Top Products
DES-7200 Configuration Guide Chapter 2 MAC Address Configuration
2-29
Command Function
DES-7200(config)#address-bind
uplink interface-id
Configure the exceptional port for the IP
address and MAC address binding.
Interface-id: port or Aggregate port
Use the no address-bind uplink interface-id command to cancel the
configuration of the specified exceptional port.
The following example shows how to set the interface GigabitEthenet 0/1 to the
exceptional port:
DES-7200#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
DES-7200(config)# address-bind uplink GigabitEthernet 0/1
2.10.4 Viewing the IP
Address and
MAC Address
Binding Table
To show the IP address and MAC address binding table, use the show
address-bind command in the privileged mode:
Command Function
DES-7200(config)#show
address-bind
View
the IP address and MAC address
binding table.
The following example shows how to view the IP address and MAC address
binding table :
DES-7200#show address-bind
Total Bind Addresses in System : 1
IP Address Binding MAC Addr
--------------- ----------------
192.168.5.1 00d0.f800.0001
2.11 Configuration Examples
2.11.1 Network
Topology
As Figure-14 shows, the database server connects to the switch through the
interface GigabitEthernet 0/1, the web server connects to the switch through the