Filter
Top Products
DES-7200 Configuration Guide Chapter 5 SPAN
Configuration
SwitchA(config)#monitor session 1 destination remote vlan 100 interface
gigabitEther
SwitchA(conf
SwitchA(config-if-GigabitEthernet 4/2)#switchport access vlan 100
config-if-GigabitEthernet 4/2)#mac-loopback
Step 3: Join the ports directly connected with PC1 and PC2 into Remote VLAN.
5.6.1.5
net 4/2 switch
ig)#interface gigabitEthernet 4/2
SwitchA(
! Join ports Gi 4/3 and Gi 4/4 of Switch A into Remote VLAN 100.
SwitchA(config)#interface range gigabitEthernet 4/3-4
SwitchA(config-if-range)#switchport access vlan 100
Verification
Step 1: Display configurations of the device.
!
vlan 100
!
!
!
switch
monitor session 1 source interface GigabitEthernet 4/1 both
te
ses
spa //source device
Gig
des
Gig
remote vlan 100 //belonging to Remote VLAN
exc
SwitchA#show running-config
remote-span
interface GigabitEthernet 4/2
switchport access vlan 100
mac-loopback
interface GigabitEthernet 4/3
switchport access vlan 100
interface GigabitEthernet 4/4
switchport access vlan 100
monitor session 1 remote-source
monitor session 1 destination remote vlan 100 interface GigabitEthernet 4/2
Step 2: Display RSPAN sta
SwitchA#show monitor
s-num: 1
n-type: SOURCE_SPAN
src-intf:
abitEthernet 4/1 frame-type Both
t-intf:
abitEthernet 4/2
mtp_switch on //Allow the destination port to
hange normal traffic
5-12