Filter
Top Products
DES-7200 Configuration Guide Chapter 4 802.1x Configuration
4-48
Viewing the List of the Addresses Authenticable
Viewing the User Authentication Status Information
Showing the 1x Client Probe Time Configuration
4.3.1 Viewing the Radius
Authentication and
Accounting Configuration
Run the show radius server command to check the related configuration of the Radius Sever,
and run the show aaa user command to view the user-related information.
DES-7200# sh radius server
Server IP: 192.168.5.11
Accounting Port: 1813
Authen Port: 1812
Server State: Ready
4.3.2 Viewing the Number of
Current Users
Our 802.1X allows you to view the numbers of two types of users: one is the number of current
users, and the other is that of the authorized users. The number of current users refers to the
total number of users authenticated (whether successfully or unsuccessfully), while the
number of authorized users means the total number of users authorized.
In the privileged mode, run the show dot1x command to check the current number of users
and authenticated users, 1x configuration, including the current number of users and
authenticated users.
The following example shows the 802.1x configuration:
DES-7200# show dot1x
802.1X Status: Disabled
Authentication Mode: EAP-MD5
Authed User Number: 0
Re-authen Enabled: Disabled
Re-authen Period: 3600 sec
Quiet Timer Period: 10 sec
Tx Timer Period: 3 sec
Supplicant Timeout: 3 sec
Server Timeout: 5 sec
Re-authen Max: 3 times
Maximum Request: 3 times
Client Oline Probe: Disabled
Eapol Tag Enable: Disabled
Authorization Mode: Disabled