Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Basic Switch Management
Configuration
The main program is complete and pass CRC check.
If any requirement is not met, the systme will prompt error, for instance:
DES-7200(config)# boot system 5 flash:/foo.bin
oot system file error:[ flash:/foo.bin] does not exist!
dition, a priority can be set for more than one main program, or otherwise
your
ion. For instnace:
7200(config)# boot system 5 flash:/firmware.bin
7200(config)# boot system 5 flash:/firmware_bak.bin
.bin]
Boot system config:
================================
e Modified Name
---- --------- ------------------- ------------------
==================================================
2.15.3 Modifying the Boot Priority
of M
Set b
In ad
the system will prompt error and print the current main program list for
select
DES-
DES-
Set boot system file error: priority 5 was assigned to file [ flash:/firmware
already.
=====================
Prio Siz
1
2
3
4
5 3205120 2008-08-26 05:22:46 flash:/firmware.bin
6
7
8
9
10
====
DES-7200(config)# boot system 6 flash:/firmware_bak.bin
ain Program
The boot system command can also modify the boot priority of main program.
DES-7200# show boot system
============================================
3
Aussme that the configured boot mian program list is shown below:
Boot system config:
=========
Prio Size Modified Name
---- --------- ------------------- ------------------
1
2
2-22