Filter
Top Products
DES-7200 Configuration Guide Chapter 4 WRED Configuration
4-5
Command Function
DES-7200(config-if)# show
queueing wred interface
<interface>
Show the WRED random-detect probability
configuration.
The following example shows how to set the random-detect probability of queue
1 on an interface:
DES-7200(config-if)#wrr-queue random-detect probability 1 61 62 63
4.2.3.4 Configuring Threshold-CoS
To configure the threshold-cos, run the following commands in the interface
configuration mode:
Command Function
DES-7200# config terminal
Enter the global configuration mode.
DES-7200(config)# interface <interface>
Enter the interface configuration mode.
DES-7200(config-if)# wrr-queue
cos-map threshold_id cos1 [cos2 [cos3
[cos4 [cos5 [cos6 [cos7 [cos8]]]]]]]
Configure the threshold-cos.
DES-7200(config-if)# show queueing
wred interface <interface>
Show the WRED random-detect
probability configuration.
The following example shows how to map the threshold2 to CoS1 and CoS6:
DES-7200(config-if)#wrr-queue cos-map 2 1 6
Note
The administrator can set the DSCP-threshold by mapping
DSCP-CoS to CoS-Threshold.
The administrator can set the Queue-threshold by mapping
CoS-Threshold to CoS-Queue.
4.2.4 Showing WRED
Configuration
To show the WRED configuration, run the following commands in the Privileged
mode:
Command Function
DES-7200(config-if)# show queueing wred
interface <interface>
Show the WRED configuration.