Filter
Top Products
DES-7200 Configuration Guide Chapter 1 VRRP Configuration
1-15
DES-7200#
VRRP: Grp 1 Event - Advert higher or equal priority
VRRP: Grp 1 Event - Advert higher or equal priority
VRRP: Grp 1 Event - Advert higher or equal priority
DES-7200#
The above displayed information indicates the priority in the VRRP advertisement
received by the local VRRP group is not lower than the local priority.
4. debug vrrp packets command
DES-7200#debug vrrp packets
DES-7200#
VRRP: Grp 2 sending Advertisement checksum DD4D
VRRP: Grp 2 sending Advertisement checksum DD4D
VRRP: Grp 2 sending Advertisement checksum DD4D
The above displayed information indicates the local VRRP group 2 is sending VRRP
advertisement, whose VRRP checksum is 0XDD4D.
DES-7200# debug vrrp packets
DES-7200#
VRRP: Grp 1 Advertisement priority 120, ipaddr 192.168.201.213
VRRP: Grp 1 Advertisement priority 120, ipaddr 192.168.201.213
VRRP: Grp 1 Advertisement priority 120, ipaddr 192.168.201.213
The above displayed information indicates the VRRP advertisement is received from
192.168.201.213 for VRRP group 1, whose priority is 120.
5. debug vrrp state command
DES-7200# debug vrrp state
VRRP State debugging is on
DES-7200#
%VRRP-6-STATECHANGE: GigabitEthernetFastEthernet 0/0 Grp 2 state Master ->
Backup
%VRRP-6-STATECHANGE: GigabitEthernetFastEthernet 0/0 Grp 2 state Backup ->
Master
DES-7200# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
DES-7200(config)# interface GigabitEthernetfastethernet 0/0
DES-7200(config-if)# no shutdown
DES-7200(config-if)# end
DES-7200#
%VRRP-6-STATECHANGE: GigabitEthernetFastEthernet 0/0 Grp 2 state Master ->
Init
DES-7200#
The above displayed information indicates the VRRP group status on GigabitEthernet
0/0 is shifting among Master, Backup and Init.