Filter
Top Products
DES-7200 Configuration Guide Chapter 1 WEB Management Configuration
Figure 1-27 Configuring extended IP address access list
Configuration Description:
Rule: Select the filtering rule from the drop-down list. There are Disable and Enable filtering
rules.
List ID (name): Enter the extended access list ID or name.
Protocol: You can select the TCP, UDP, IP, or ICMP protocol.
Source IP address: You can select the Any source IP address or Specify IP address
range option button. The wildcard is optional.
Source port: This parameter is optional.
Destination IP address: You can select the Any source IP address or Specify IP address
range option button. The wildcard is optional.
Destination port: This parameter is optional.
After the parameters are configured, click Save to validate the configuration.
3) Applying ACL in the Port
1-24