Filter
Top Products
DES-7200 Configuration Guide Chapter 6 REUP Configuration
6-14
Enable the function of receiving the MAC address updating message on Switches B, C
and A, and add all ports on the switched path to the same MAC address updating
group.
Apply the following configurations on Switch A
DES-7200 # configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
DES-7200 (config)# mac-address-table move update receive
DES-7200 (config)# interface range gigabitEthernet 0/3-4
DES-7200 (config-if-range)# mac-address-table update group
DES-7200 (config-if-range)# end
DES-7200 # show mac-address-table update group detail
Mac-address-table Update Group:1
Received mac-address-table update message count:0
Group member Receive Count Last Receive Switch-ID Receive Time
-----------------------------------------------------------
Gi0/3 0 0000.0000.0000
Gi0/4 0 0000.0000.0000
Apply the following configurations on Switch B:
DES-7200 # configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
DES-7200 (config)# mac-address-table move update receive
DES-7200 (config)# interface range gigabitEthernet 0/5-6
DES-7200 (config-if-range)# mac-address-table update group
DES-7200 (config-if-range)# end
Apply the following configurations on Switch C:
DES-7200 # configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
DES-7200 (config)# mac-address-table move update receive
DES-7200 (config)# interface range gigabitEthernet 0/7-8
DES-7200 (config-if-range)# mac-address-table update group